Don't Mess With Phil: AOPA Pressure Forces Change To Moored Balloon Experiment | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Tue, Jan 13, 2004

Don't Mess With Phil: AOPA Pressure Forces Change To Moored Balloon Experiment

As a direct result of pressure from AOPA, the FAA has lowered the altitude of a moored balloon experiment and raised the safety level for pilots operating in the Lancaster, Pa., area.

AOPA sent a scathing letter to the FAA just before New Years over a Millersville University experiment that involved a moored balloon at 3,600' MSL, above the minimum obstacle clearance altitude (MOCA) for several Victor airways in that area. Notice of the experiment was published only 10 days before the experiment was set to begin, and the public comment period didn't end until after the experiment was scheduled to be complete.

A new NOTAM issued Thursday lowers the balloon's permitted altitude to 2,600' MSL, and raises the MOCA and minimum en route altitudes (MEAs) for those airways to 3,700' MSL.

"Even though we asked that this study be halted immediately, we believe the safety issues have been adequately addressed," said Heidi Williams, AOPA manager of air traffic. "But we hope that in the future, the FAA will pay closer attention to these kinds of safety details, and will do a better job of notifying pilots and allowing for public comment."

Text Of AOPA Letter To FAA

The Aircraft Owners and Pilots Association (AOPA), representing over 400,000 general aviation pilots, is opposed to the proposal by Millersville University, Department of Earth Science plan for a January 2, 2004 launch of a moored balloon to an altitude of 3,600 msl for atmospheric studies. AOPA bases this opposition on potential safety impacts and a lack of advanced notice to pilots.

The altitudes of the lit moored balloon as proposed in the study conflict with the 2,600ft MSL Minimum Obstruction Clearance Altitude (MOCA) for V93 and V457. In an emergency descent from the 4,500ft MSL Minimum En-Route Instrument Altitude (MEA) to the MOCA altitude, the moored balloon creates a serious collision hazard. In addition, the moored balloon would conflict with the MEA for V469 currently at 3,000ft MSL. Clearly, there are safety issues that must be addressed before the moored balloon study commences.

AOPA is also very concerned with the lack of advanced notification of the atmospheric studies. Additional time is necessary for users to adequately comment on the associated impacts created by the moored balloon before a study can commence. Receiving comments after-the-fact does not solve safety issues created by the moored balloon and will result in compromising the safety of many pilots transiting the airspace.

We request that the FAA take immediate action to prohibit the use of the National Airspace for the upcoming atmospheric studies until the safety issues can be resolved.

Sincerely,

Brent Hart, Government Analyst

FMI: www.aopa.org

Advertisement

More News

Airbus Racer Helicopter Demonstrator First Flight Part of Clean Sky 2 Initiative

Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]

Diamond's Electric DA40 Finds Fans at Dübendorf

A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]

ANN's Daily Aero-Term (04.23.24): Line Up And Wait (LUAW)

Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]

NTSB Final Report: Extra Flugzeugbau GMBH EA300/L

Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]

Classic Aero-TV: 'Never Give Up' - Advice From Two of FedEx's Female Captains

From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC