Airbus Clean Tech Demonstrator Takes Flight | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Fri, Jan 28, 2022

Airbus Clean Tech Demonstrator Takes Flight

Manufacturer Tests Morphing Wing, Digital Controls, And Flat Antenna Under Green Initiative for Regional Commuters

Airbus completed the first test flight of its regional commuter,  demonstration aircraft for the Clean Sky 2 program.

The company sent its C295, currently named “Flight Test Bed 2”, off from its final assembly point in Seville, Spain. With its maiden voyage out of the way, the C295 now begins evaluating its prototype features for future designs that could make them more environmentally friendly. 

The Airbus C295 is a part of both the pan-European Clean Sky 2 and the EU Horizon 2020 research and innovation programs. Each of them, among other efforts around the world, hopes to increase efficiency and decrease harmful emissions of aircraft by using a slate of fresh technologies, refinements, and materials. The C295 tests some relatively affordable, production-ready features like a semi-morphing wing, a digital flight control system, and a low-profile satellite communications antenna. So far, it's expected that a standard, regional, multimission aircraft could see up to 43% CO2 and 70% NOx reductions can be achieved in a typical Search and Rescue mission of 400 nautical miles, as well as 45% less noise during take-off. 

The aerodynamic design uses an evolution of dynamic winglets on the morphing wing. Similarly tailored, revised flight controls see improvements to all primary control surfaces for better, more efficient flight. Inside the aircraft, the flight control system has been digitized for electronic command and adjustment in-flight. Throughout the build process, the C295 has been built with updated materials, including liberal use of 3d-printed scalmalloy parts to simplify design and create pieces that would be impossible to manufacture through traditional means. 

“The first flight of the C295 FTB2 is a key milestone that represents an important step forward in the program, following the successful integration of the new aero structures, power-on and ground tests. A few years ago this program was just a dream of a more sustainable future for aviation. Today we are at the final stage and we finally made it fly” said Francisco Javier Sánchez Segura, executive vice president engineering Airbus defence and space.

FMI:www.airbus.com

Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC