Fri, Jan 07, 2005
Handbook Bulletin Implementation Put Off Until Summer's
End
The National Air Transportation
Association (NATA) has successfully convinced the Federal Aviation
Administration (FAA) to extend the implementation of a costly
Handbook Bulletin affecting aircraft maintenance programs to August
31, 2005.
At issue is a recent revision to the Handbook Bulletin for
Airworthiness, 04-06D, which was originally issued in August 2004
and addresses aircraft configuration and maintenance programs for
aircraft operated under Part 135. The original deadline of
September 30, 2004, had been incrementally extended until February
28, 2005. In a call this week with NATA staff and members of the
association’s Aircraft Maintenance and System Technology
Committee, FAA officials explained that the additional delay was to
allow more time to review comments submitted by NATA and to
evaluate alternative solutions.
Many operators, in order to meet a nine or fewer passenger-seat
configuration standard, have placarded or otherwise blocked certain
seats to make them unusable. These aircraft are then generally
maintained under 135.411(a)(1) requirements. The new guidance in
HBAW 04-06 would require the physical removal of these seats or a
switch to the 134.411(a)(2) maintenance program.
Most operators would be required to
obtain a Supplemental Type Certificate (STC) for the seat removal.
Using a placard to make a seat unusable by passengers, even if
previously approved by the FAA, would not be acceptable under this
new policy.
NATA staff and members of the association's Air Charter and
Aircraft Maintenance and System Technology committees have met
extensively with the FAA to voice concerns with the agency's course
of action.
Compliance with the bulletin would have a staggering economic
impact on the air charter industry, costing thousands of dollars
per aircraft to obtain the STC. The overall impact on the industry
could be several million dollars.
"We are pleased that our excellent working relationship with the
FAA has proven to them that we are committed to finding common
sense solutions to problems facing our industry," said Eric R.
Byer, NATA Vice President of Government and Industry Affairs. "We
applaud the FAA’s willingness to work with us to help sustain
a valuable sector of our economy."
More News
Say Altitude Used by ATC to ascertain an aircraft's specific altitude/flight level. When the aircraft is climbing or descending, the pilot should state the indicated altitude round>[...]
Aero Linx: European Air Law Association (EALA) EALA was established in 1988 with the aim to promote the study of European air law and to provide an open forum for those with an int>[...]
From 2023 (YouTube Version): The Life, Death, Life, Death, and Life of a Glorious Warbird In 1981, business-owner Jim Tobul and his father purchased a Chance-Vought F4U Corsair. Mo>[...]
Also: USCG Retires MH-65 Dolphins, Irish Aviation Authority, NATCA Warns FAA, Diamond DA42 AD This summer, history enthusiasts will have a unique opportunity to experience World Wa>[...]
Also: WACO Kitchen Bails, French SportPlane Mfr to FL, Dynon-Advance Flight Systems, Innovation Preview Bobby Bailey, a bit of a fixture in sport aviation circles for his work with>[...]