Mon, Jul 17, 2017
AD NUMBER: 2017-10-12
PRODUCT: Airbus Helicopters Model AS332C, AS332C1, AS332L, AS332L1, AS332L2, and EC225LP helicopters.
ACTION: Final Rule.
SUMMARY: This AD requires repetitive inspections of the intermediate gear box (IGB) fairing. This AD was prompted by separation of the IGB fairing from the fairing gutter and subsequent interference with the drive shaft.
These helicopters have been approved by the aviation authority of France and are approved for operation in the United States. Pursuant to our bilateral agreement with France, EASA, its technical representative, has notified us of the unsafe condition described in the EASA AD.
The FAA is issuing this AD because we evaluated all information provided by EASA and determined the unsafe condition exists and is likely to exist or develop on other helicopters of these same type designs and that air safety and the public interest require adopting the AD requirements as proposed.
The FAA estimates that this AD affects 11 helicopters of U.S. Registry and that labor costs average $85 per work-hour. Based on these estimates, we expect the following costs:
- Visually inspecting each IGB fairing and the left- and right-hand attachment supports for a crack require a 0.5 work-hour for a total cost of $43 per helicopter and $473 for the U.S. fleet, per inspection cycle.
- Replacing the IGB fairing requires 2 work hours and parts cost $2,600, for a total cost of $2,770 per helicopter and $30,470 for the U.S. fleet.
- Replacing the attachment supports requires 2 work hours, and parts cost $1,100 for a total cost of $1,270 per helicopter.
- Visually inspecting for a crack in the fairing gutter requires 0.5 work hour for a total cost of about $43 per helicopter.
- Inspecting for interference and separation of the fairing gutter requires 0.5 work hour for a total cost of $43 per helicopter.
- Replacing the inclined drive shaft tube requires 2 work hours, and parts cost $18,399, for a total cost of $18,569 per helicopter.
- Replacing a hydraulic pipe requires 2 work hours, and parts cost $1,322, for a total cost of $1,492 per helicopter.
- Repairing the flight control assembly requires 2 work hours, and parts cost $484, for a total cost of $654 per helicopter.
DATES: This AD is effective August 15, 2017.
FMI: AD
More News
Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]
Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]
“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]
How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]
Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]