Thu, May 05, 2005
Dassault's Falcon 7X
has flown for the first time, Thursday afternoon, at Dassault
Aviation's facility in Bordeaux Merignac, France. Falcon 7X s/n 1
took to the skies for the first time with Test pilots Yves "Bill"
Kerherve and Philippe Deleume at the controls. The airplane lifted
off at 8:45 am EST and flew for an hour and thirty six minutes.
"The first flight of the Falcon 7X was a success," said Kerherve
who is the Senior Test Pilot for Dassault Aviation. "The aircraft
performed beautifully and we're on track to start the rigorous 15
months of flight testing that lay ahead."
After departing Bordeaux's International Airport, the aircraft
climbed directly to 10,000 feet where various systems checks
including hydraulic, fuel, air data systems and landing gear
extraction/retraction tests were performed. The airplane then
climbed to 25,000 feet where acceleration/deceleration tests were
conducted as well as basic autopilot and auto-throttle
operations.
The Falcon 7X carried the registration numbers of F-WFBW to
remind those watching that this is the first business jet designed
with a Fly By Wire flight control system. The test aircraft was
fully equipped with instrumentation to allow the measurement of
more than 3000 digital and 1000 analog parameters. It touched down
at the Bordeaux airport at 10:21 a.m. EST.
"Today the pioneering spirit of Marcel Dassault lives on," said
Charles Edelstenne, Chairman and CEO of Dassault Aviation. "That
spirit is embodied in every one of our engineers, partners,
customers and flight test team who made this spectacular event
possible. This is surely a day we will all remember for years to
come."
During the next test flight, the airplane will be relocated to
the Dassault Test Center in Istres, France. The second test
aircraft will arrive in Istres in the 2rd Quarter and the third
test aircraft will arrive this summer. Falcon 7X s/n 3 will be
outfitted with a full interior and will be used for long range and
endurance tests as well as interior sound level validation.
Approximately 1,200 flight test hours have been allotted before
final certification by the FAA and EASA before the end of 2006.
Dassault says that it has 50 firm orders for the new biz-jet.
A static and fatigue test airframe has been undergoing tests at
CEAT in Toulouse since March 2005.
More News
Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]
A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]
Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]
Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]
From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]