NTSB Prelim: Aeronca 7AC | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Sat, Oct 15, 2022

NTSB Prelim: Aeronca 7AC

Was The Pilot’s First Flight In 20 Years...

Location: Jacksboro, TN Accident Number: ERA22FA391
Date & Time: August 29, 2022, 12:50 Local Registration: N1478E
Aircraft: Aeronca 7AC Injuries: 1 Fatal
Flight Conducted Under: Part 91: General aviation - Personal

On August 29, 2022, about 1250 eastern daylight time, an Aeronca 7AC airplane, N1478E, was substantially damaged when it was involved in an accident near Jacksboro, Tennessee. The private pilot was fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

According to a friend of the pilot, he purchased the airplane the day prior to the accident. She said this was the pilot’s first flight in 20 years, and he just wanted to “take it up for a flight.” She recalled that the airplane took off from the runway “real early.” After takeoff, the airplane made a “sharp” turn to the left and descended below the tree line. She then contacted the local authorities and waited for them to arrive.

The airplane came to rest nose down in a field adjacent to the airport runway. It was orientated on a magnetic heading of 23°. All primary flight control surfaces remained attached to the airplane. Flight control continuity was established to all primary flight control surfaces. The nose of the airplane was crushed aft to the cockpit. The engine and avionics instruments were destroyed by impact. Examination of the fuselage revealed the wings remained attached to the fuselage and were impact damaged. Both wings displayed accordion crush damage along their leading edges. The empennage was bent over the fuselage and remained partially attached. The horizontal and vertical control surfaces remained attached to the empennage.

The wreckage was recovered and retained for further examination.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Term (05.06.24): Altitude Readout

Altitude Readout An aircraft’s altitude, transmitted via the Mode C transponder feature, that is visually displayed in 100-foot increments on a radar scope having readout cap>[...]

ANN's Daily Aero-Linx (05.06.24)

Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC