NTSB Final Report: Piper PA-22-160 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.14.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Sat, Oct 07, 2023

NTSB Final Report: Piper PA-22-160

Shortly After Takeoff, The Engine Lost Power And The Propellor Began To Windmill

Location: Kenai, Alaska Accident Number: ANC23LA005
Date & Time: October 26, 2022, 16:56 Local Registration: N8119D
Aircraft: Piper PA-22-160 Aircraft Damage: Substantial
Defining Event: Loss of engine power (total) Injuries: 2 None
Flight Conducted Under: Part 91: General aviation - Instructional

Analysis: Shortly after takeoff, the engine lost power and the propellor began to windmill. The flight instructor conducted emergency procedures but was unable to regain engine power. The flight instructor determined that they did not have sufficient altitude to make it back to the airport and he selected a road on which to make a forced landing. To avoid a car, the pilot turned slightly towards the edge of the road and was pulled into a snow berm, where the aircraft came to a full stop. The airplane sustained substantial damage to the right wing and fuselage. 

A postaccident examination of the engine found the crankshaft drive gear bolt was missing and the gear alignment dowel pin on the crankshaft was broken. The missing bolt was not found during the postaccident examination. The engine was last disassembled in 1983 and the accessory gearbox was opened for an oil pump rebuild in 2006; the investigation was not able to identify how long the engine had operated with the bolt missing. The crankshaft drive gear drives the accessory gear box and, according to the engine manufacturer, failure of the gear or the gear attaching parts would result in complete engine stoppage. 

Probable Cause and Findings: The National Transportation Safety Board determines the probable cause(s) of this accident to be -- Improper installation of the crankshaft drive gear by maintenance personnel, who failed to install all required hardware, resulting in an in-flight engine failure.

FMI: www.ntsb.gov

Advertisement

More News

Bolen Gives Congress a Rare Thumbs-Up

Aviation Governance Secured...At Least For a While The National Business Aviation Association similarly applauded the passage of the FAA's recent reauthorization, contentedly recou>[...]

The SportPlane Resource Guide RETURNS!!!!

Emphasis On Growing The Future of Aviation Through Concentration on 'AFFORDABLE FLYERS' It's been a number of years since the Latest Edition of Jim Campbell's HUGE SportPlane Resou>[...]

Buying Sprees Continue: Textron eAviation Takes On Amazilia Aerospace

Amazilia Aerospace GmbH, Develops Digital Flight Control, Flight Guidance And Vehicle Management Systems Textron eAviation has acquired substantially all the assets of Amazilia Aer>[...]

Hawker 4000 Bizjets Gain Nav System, Data Link STC

Honeywell's Primus Brings New Tools and Niceties for Hawker Operators Hawker 4000 business jet operators have a new installation on the table, now that the FAA has granted an STC f>[...]

Echodyne Gets BVLOS Waiver for AiRanger Aircraft

Company Celebrates Niche-but-Important Advancement in Industry Standards Echodyne has announced full integration of its proprietary 'EchoFlight' radar into the e American Aerospace>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC