Wed, Jan 12, 2022
AD 2021-26-17 Prompted By A Determination That Certain Airplanes Are Listed In The Wrong Configuration
The FAA is superseding Airworthiness Directive (AD) 2019-03-26, which applied to certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes.
AD 2019-03-26 required modifying the passenger service units (PSUs) and life vest panels by replacing the existing inboard lanyard and installing two new lanyards on the outboard edge of the PSUs and life vest panels; measuring the distance between the hooks of the torsion spring of the lanyard assembly; replacing discrepant lanyard assemblies; and re-identifying serviceable lanyard assemblies. This AD was prompted by a determination that certain airplanes are listed in the wrong configuration and certain PSUs have not been correctly re-identified. This AD retains the requirements of AD 2019-03-26, and, for certain airplanes, requires an inspection to determine if the re-identified PSU part number is correct, and further re-identification if necessary. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective February 15, 2022.
Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2019-03-26, Amendment 39-19578 (84 FR 7266, March 4, 2019) (AD 2019-03-26).
AD 2019-03-26 applied to certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. The NPRM published in the Federal Register on June 30, 2021 (86 FR 34653). The NPRM was prompted by a determination that certain airplanes are listed in the wrong configuration and certain PSUs have not been correctly re-identified. In the NPRM, the FAA proposed to continue to require the requirements of AD 2019-03-26, and, for certain airplanes, would require an inspection to determine if the re-identified PSU part number is correct, and further reidentification if necessary. The FAA is issuing this AD to address PSUs and life vest panels detaching from the supporting airplane structure, which could lead to passenger injuries and impede passenger and crew egress during evacuation.
More News
With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]
Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]
“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]
"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]
IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]