AD: Certain Airbus A300 Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

** Airborne/NBAA2014 10.24.14 ** HD iPad-Friendly -- Airborne/NBAA2014 10.24.14 **
** Airborne/NBAA2014 10.22.14 ** HD iPad-Friendly -- Airborne/NBAA2014 10.22.14 **
** Airborne/NBAA2014 10.21.14 ** HD iPad-Friendly -- Airborne/NBAA2014 10.21.14 **
** Airborne/NBAA2014 10.20.14 ** HD iPad-Friendly -- Airborne/NBAA2014 10.20.14 **

Mon, Oct 24, 2011

AD: Certain Airbus A300 Airplanes

AD NUMBER: 2011-21-09

MANUFACTURER: Airbus Model A300 B4-103, B4-203, and B4-2C Airplanes
SUBJECT: Airworthiness Directive 2011-21-09
ACTION: Final rule

SUMMARY: The FAA is superseding an existing airworthiness directive (AD) that applies to the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

One operator reported a failure of the MLG [main landing gear] retraction actuator sliding rod. This incident occurred at a number of operating flight cycles lower than the limit value imposed by the MLG manufacturer. This condition, if not detected and corrected, results in undampened extension of the MLG, leading to higher than usual loads on the MLG attachment. Higher loads affect the structural integrity of the MLG and could lead to MLG failure.

DATES: This AD becomes effective November 23, 2011.

FMI: AD

Advertisement

More News

Airborne at NBAA-10.22.14: Legacy 500, Universal InSight, BendixKing AeroWave

Also: GE Honda, Sagem's Active SideStick, Syberjet Update, Techno Aerospace Knows How to Party The FAA handed over certification papers for Embraer's Legacy 500 executive jet durin>[...]

ANN's Daily Aero-Linx (10.24.14)

Homebuilt Homepage: Clubs And Newsletters This page lists Homebuilt related Clubs and Newsletters.>[...]

ANN's Daily Aero-Term (10.24.14): Phase Separation – Aviation Fuel

Phase separation is when a combined liquid separates into two different liquids and may occur when autogas is used for aviation fuel.>[...]

Aero-News: Quote Of The Day (10.24.14)

“I’m excited and humbled by the trust that the ALPA Board of Directors has placed in me with this election.” Source: ALPA President-Elect Tim Canoll.>[...]

ANN FAQ: Q&A 101

A Few Questions AND Answers To Help You Get MORE Out of ANN!>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2014 Web Development & Design by Pauli Systems, LC