Fri, May 04, 2012
AD NUMBER: 2012-09-01
PRODUCT: Certain Cessna Aircraft Company Model 560XL airplanes.
SUBJECT: Airworthiness Directive 2012-09-01
ACTION: Final Rule
SUMMARY: This AD was prompted by reports of wheel inserts becoming loose and damaging brake assemblies on Model 560XL airplanes. This AD requires an inspection of the torque lug and surrounding components (wheel base, side rim, lock ring) for damage (such as corrosion, cracks, dents, bent areas, damaged or missing paint or primer, or wear on the metal), and of the bearing cup for corrosion, turned cup, or clearance that exceeds limits, and repair as applicable; measuring the torque lugs for width and replacing screws and inserts with new, improved screws and inserts; and re-identifying the wheel assemblies. The FAA is issuing this AD to prevent brake failure, which could result in an airplane not being able to stop on the runway.
DATES: This AD is effective June 7, 2012.
Expands Line Maintenance Offering With New Bremen Site Textron Aviation has opened a new European line maintenance station in Bremen, Germany, further enhancing its service offerin>[...]
Supersonic Aircraft Will Be Built And Flown Over The Next 10 Years History is about to repeat itself. There have been periods of time during the past seven decades – some bus>[...]
Classes Will Be Held At Pellston Regional Airport Alanson, Michigan Superintendent of Schools Dean Paul has established an aviation program for high school students with classes to>[...]
The FAA Administrator Says Progress Is Being Made On UAS Issues The FAA held a UAS Symposium in conjunction with Embry-Riddle Aeronautical University last week to broaden the dialo>[...]
Gowdy Brothers Aerospace Looks To The Future Of Non-Recreational UAS Use FAA Airman and Airspace Rules Division announces 5,076 approved Section 333 petition grants. The FAA furthe>[...]