Tue, May 29, 2012
AD NUMBER: 2012-10-07
PRODUCT: Certain Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, & 702); CL-600-2D15 (Regional Jet Series 705); CL-600-2D24 (Regional Jet Series 900); and CL-600-2E25 (Regional Jet Series 1000) airplanes.
SUBJECT: Airworthiness Directive 2012-10-07
ACTION: Final Rule
SUMMARY: This AD was prompted by reports of deformation of the pressure regulator on the oxygen cylinder, which was attributed to batches of raw material that did not meet required tensile strength.
This AD requires an inspection to determine if certain oxygen pressure regulators are installed, and replacement of oxygen cylinder and regulator assemblies (CRAs) containing pressure regulators that do not meet required material properties.
The FAA is issuing this AD to prevent elongation of the pressure regulator neck, which could result in rupture of the oxygen cylinder, and in the case of cabin depressurization, oxygen would not be available when required.
DATES: This AD becomes effective June 29, 2012.
"The discovery of Kepler-186f is a significant step toward finding worlds like our planet Earth. Future NASA missions, like the Transiting Exoplanet Survey Satellite and the James >[...]
Removes 'Getting To The Airport' As An Excuse To Not Go Skydiving So imagine it's a beautiful day to go jump out of an airplane in the greater New York City area, but you just don'>[...]
Ground Stop Ground Stops are implemented for a number of reasons. The most common reasons are: 1) To control air traffic volume to airports when the projected traffic demand is exp>[...]
Aero Linx: The Australian Parachute Federation The Australian Parachute Federation exists to administer and represent Australian Sport Parachuting. This is achieved by promoting an>[...]
ANN goes through a lot of trouble to make the graphics flashy and cool and an integral part of the story. But let's face it, they're bandwidth-intensive. So here are a couple of th>[...]