Watch Out! NTSB Updates Report On Runway Incursion At Logan | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Tue, Jun 23, 2009

Watch Out! NTSB Updates Report On Runway Incursion At Logan

Construction Crew Crossed Active Runway

The NTSB has released a preliminary report for a runway incursion incident, in which a construction vehicle crossed an active runway at Boston's Logan International Airport as a USAirways Airbus A320 was on its takeoff roll.

According to the NTSB report:

On Thursday, June 18, 2009 at about 0636 eastern daylight time, a runway incursion occurred at the General Edward Lawrence Logan International Airport (BOS), Boston, Massachusetts involving a USAirways Airbus and a construction vehicle. The construction crew crossed runway 15R at taxiway M without approval as the Airbus was on departure roll.

According to the Federal Aviation Administration (FAA), the operator of a Ford Explorer, was not in radio communication with BOS tower air traffic controllers and had not been cleared to cross runway 15R. The Airbus rotated approximately 500 feet from the intersection of runway 15R and taxiway M as the vehicle cleared the runway edge southbound on taxiway M. The FAA stated that it appeared the tower controller was aware of the vehicle operating on taxiway M but not its intension to cross. The ground radar alerted the controllers of the event.

Taxiway M is currently under construction and runway 15R is occasionally closed due to the construction. The Airport Authority designates the runway closure with signage which was not in place during this event indicating that the runway was an active runway. The Airport Authority also indicated that all personnel were briefed that the runway was active. The driver of the
vehicle indicated that he had not been briefed to that fact. The driver has been suspended from driving on the airport pending an investigation.

The Airport Authority has ceased all construction upon completion of an investigation into the incident. USAirways flight 27, an Airbus A320, was departing Boston for Phoenix, Arizona with 84 passengers and five. There were no injuries to the crew and passengers nor damage to the airplane. The incident occurred during daylight visual meteorological conditions.

FMI: www.ntsb.gov 

Advertisement

More News

SpaceX to Launch Inversion RAY Reentry Vehicle in Fall

Inversion to Launch Reentry Vehicle Demonstrator Aboard SpaceX Falcon 9 This fall, the aerospace startup Inversion is set to launch its Ray reentry demonstrator capsule aboard Spac>[...]

Aero-News: Quote of the Day (04.23.24)

"We are excited to accelerate the adoption of electric aviation technology and further our journey towards a sustainable future. The agreement with magniX underscores our commitmen>[...]

Aero-News: Quote of the Day (04.20.24)

"The journey to this achievement started nearly a decade ago when a freshly commissioned Gentry, driven by a fascination with new technologies and a desire to contribute significan>[...]

ANN's Daily Aero-Linx (04.20.24)

Aero Linx: OX5 Aviation Pioneers Each year a national reunion of OX5 Aviation Pioneers is hosted by one of the Wings in the organization. The reunions attract much attention as man>[...]

Aero-News: Quote of the Day (04.21.24)

"Our driven and innovative team of military and civilian Airmen delivers combat power daily, ensuring our nation is ready today and tomorrow." Source: General Duke Richardson, AFMC>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC