USAF Explains Oshkosh F-16 Overrun | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Sat, Feb 25, 2012

USAF Explains Oshkosh F-16 Overrun

Fogged Cockpit, Concern For Spectators Cited

The US Air Force has concluded its investigation into last summer's incident at EAA AirVenture, in which an F-16 overran runway 36 and headed 300 feet off into the grass. The report says the jet's environmental control system (ECS) caused fogging that obscured the pilot's vision, and resisted his efforts to clear the canopy.

The Report adds the fogging (visible in photo from report) began just as the pilot started his landing flare. It reads, in part, "As the throttle was retarded to idle, fog began to envelope the entire cockpit...he lost sight of the HUD gun-cross and was unable to use the Nose Wheel Steering (NWS) indicator and AOA indexers for a visual reference...

"Using the view out the side of the canopy, the MP focused on keeping the aircraft tracking down the runway. The MP reached for the DEFOG lever and shoved it full forward. He held it in that position for one or two seconds with no effect and then recycled, with yet again no change in ECS fog or airflow. The MP then experienced brief vertigo, almost a tumbling sensation, and
considered ejection but was concerned for spectators and aircraft along the runways. The MP did not consider initiating a go-around because of the disorientation and no assurance that the ECS fog would dissipate, rendering the MP blind while navigating through the congested traffic pattern.

"The MP never saw the end of the runway approaching, but felt that he had enough remaining runway to stop. Runway 36L has no overrun or arresting gear. As the MA departed the runway surface, the MP felt a bump and rumbling, and then the nose dug in. The ECS fog cleared as the engine ingested dirt and sod."

At that point, the report adds, the nosewheel turned and broke off and the nose contacted the ground, breaking off both the nose and avionics bay, just forward of the cockpit bulkhead. The engine intake ingested dirt and sod as the aircraft came to a stop.

Damage to the plane is estimated at 5-point-4-million dollars. The unidentified pilot was assigned to the 100th Fighter Squadron, 187th Fighter Wing, based in Alabama.

FMI: Read the Report

Advertisement

More News

SpaceX to Launch Inversion RAY Reentry Vehicle in Fall

Inversion to Launch Reentry Vehicle Demonstrator Aboard SpaceX Falcon 9 This fall, the aerospace startup Inversion is set to launch its Ray reentry demonstrator capsule aboard Spac>[...]

Aero-News: Quote of the Day (04.23.24)

"We are excited to accelerate the adoption of electric aviation technology and further our journey towards a sustainable future. The agreement with magniX underscores our commitmen>[...]

Aero-News: Quote of the Day (04.20.24)

"The journey to this achievement started nearly a decade ago when a freshly commissioned Gentry, driven by a fascination with new technologies and a desire to contribute significan>[...]

ANN's Daily Aero-Linx (04.20.24)

Aero Linx: OX5 Aviation Pioneers Each year a national reunion of OX5 Aviation Pioneers is hosted by one of the Wings in the organization. The reunions attract much attention as man>[...]

Aero-News: Quote of the Day (04.21.24)

"Our driven and innovative team of military and civilian Airmen delivers combat power daily, ensuring our nation is ready today and tomorrow." Source: General Duke Richardson, AFMC>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC