ANN's Daily Aero-Tips (10.30.06): Engine Fires On Startup | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Mon, Oct 30, 2006

ANN's Daily Aero-Tips (10.30.06): Engine Fires On Startup

Aero-Tips!

A good pilot is always learning -- how many times have you heard this old standard throughout your flying career? There is no truer statement in all of flying (well, with the possible exception of "there are no old, bold pilots.")

Aero-News has called upon the expertise of Thomas P. Turner, master CFI and all-around-good-guy, to bring our readers -- and us -- daily tips to improve our skills as aviators. Some of them, you may have heard before... but for each of us, there will also be something we might never have considered before, or something that didn't "stick" the way it should have the first time we memorized it for the practical test.

Look for our daily Aero-Tips segments, coming each day to you through the Aero-News Network.

Aero-Tips 10.30.06

Engine fires during start can happen any time for any number of reasons, but by far they most frequently occur in cold weather from over-priming. What should we do in the event of an engine fire on the ground?

Checklist

Most aircraft manuals have a checklist that outlines steps to follow in the vent of an engine fire on the ground. Not that you'd have time to pull out the Pilots Operating Handbook (POH) if it happens to you. You need to look in the POH for the airplane you're flying and memorize the procedure for the unlikely event you'll need to use it.

There are several variations on the procedure, but all contain these basic steps:

  • Mixture.................IDLE CUTOFF
  • Fuel selector...........OFF
  • CONTINUE CRANKING TO PULL FIRE INTO INDUCTION SYSTEM
  • EVACUATE THE AIRCRAFT

Again, review the POH for the airplane you're currently flying for the best technique to use.

Engine Types

There are two basic types of reciprocating aircraft engines:

  • Carbureted engines. Fuel is combined with air and then pulled into the induction system through the carburetor venture. If a fire starts as a result of overpriming (or in some types, aggressively pumping the throttle during start) but the engine itself starts, suction may draw the fire inside the engine. Hence the advice to keep cranking the starter, although I know of no POH that provides any guidance on how long to keep cranking.
  • Fuel-injected engines. Fuel is delivered directly to each cylinder, combining with air in the induction manifold just before the intake valve. Overpriming a fuel-injected engine may cause fuel to collect in the intake manifold, and cranking after a fire starts may pull the flames into the cylinders. But often overpriming a fuel-injected engine puts a lot of fuel in the exhaust manifold, and starter operation will do nothing to draw in the fire. So although continuing cranking may help in some cases, it's not as likely to put out the external fire as it might be with a carburetor.
Get out, check it out

It's fairly rare, but sometimes an engine fire after start eventually consumes and destroys the entire airplane. Crank a few seconds to try to draw in the fire, but then evacuate the aircraft and get well away. If a large-capacity fire extinguisher is available you might be able to put the fire out, but a small in-cabin type may not be adequate. Get your passengers and yourself out of danger.

If the fire does go out, whether through cranking or on its own after you evacuate, get a mechanic to remove the cowling and take a very good look at the aircraft for possible damage. If everything checks out okay, consider a local test flight before venturing out of the traffic pattern.

Avoidance

Carefully prime the engine before a cold-weather start. Preheat the engine if the temperature is below about 40 degrees F to make for an easier start. Better yet, hangar the airplane the night before if at all possible. Even an unheated hangar often keeps the engine warm enough to avoid the need for aggressive priming.

Aero-tip of the day: Know how to avoid engine fires during start, and what to do if one happens to you.

FMI: Aero-Tips

Advertisement

More News

SpaceX to Launch Inversion RAY Reentry Vehicle in Fall

Inversion to Launch Reentry Vehicle Demonstrator Aboard SpaceX Falcon 9 This fall, the aerospace startup Inversion is set to launch its Ray reentry demonstrator capsule aboard Spac>[...]

Aero-News: Quote of the Day (04.23.24)

"We are excited to accelerate the adoption of electric aviation technology and further our journey towards a sustainable future. The agreement with magniX underscores our commitmen>[...]

Aero-News: Quote of the Day (04.20.24)

"The journey to this achievement started nearly a decade ago when a freshly commissioned Gentry, driven by a fascination with new technologies and a desire to contribute significan>[...]

ANN's Daily Aero-Linx (04.20.24)

Aero Linx: OX5 Aviation Pioneers Each year a national reunion of OX5 Aviation Pioneers is hosted by one of the Wings in the organization. The reunions attract much attention as man>[...]

Aero-News: Quote of the Day (04.21.24)

"Our driven and innovative team of military and civilian Airmen delivers combat power daily, ensuring our nation is ready today and tomorrow." Source: General Duke Richardson, AFMC>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC