AD: Certain Model Cessna 150 Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Recent Daily Episodes

Episode Date

AMA Drone Report

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday

Airborne-Thursday

Airborne-Friday

Airborne On ANN

ADR 02.20.17

Airborne 02.20.17

Airborne 02.21.17

Airborne 02.22.17

Airborne 02.23.17

Airborne 02.24.17

Airborne-HD On YouTube

ADR 02.20.17

Airborne 02.20.17

Airborne 02.21.17

Airborne 02.22.17

Airborne 02.23.17

Airborne 02.24.17

Tue, Aug 30, 2011

AD: Certain Model Cessna 150 Airplanes

AD NUMBER: 2009-10-09 R2

MANUFACTURER: Certain Cessna Aircraft Company (Cessna) Models 150F, 150G, 150H, 150J, 150K, 150L, 150M, A150K, A150L, A150M, F150F, F150G, F150H, F150J, F150K, F150L, F150M, FA150K, FA150L, FRA150L, FA150M, FRA150M, 152, A152, F152, and FA152 airplanes.
SUBJECT: Airworthiness Directive 2009-10-09 R2
ACTION: Final rule; request for comments

SUMMARY: This AD is a revision of an existing airworthiness directive (AD) for Certain Cessna Aircraft Company (Cessna) Models 150F, 150G, 150H, 150J, 150K, 150L, 150M, A150K, A150L, A150M, F150F, F150G, F150H, F150J, F150K, F150L, F150M, FA150K, FA150L, FRA150L, FA150M, FRA150M, 152, A152, F152, and FA152 airplanes. That AD currently requires either installing a placard prohibiting spins and other acrobatic maneuvers in the airplane or replacing the rudder stop, the rudder stop bumper, and the attachment hardware with a rudder stop modification kit. This new AD requires a change to the modification kit and removal of a small amount of material from the rudder horn assembly for those that have not yet complied with the existing AD or for those who can not comply with the existing AD (because they were unable to obtain full rudder travel with the existing kits). This AD was prompted by operators who have reported difficulty in obtaining full rudder travel with the existing modification kit. The FAA is issuing this AD to revise the kits to use longer rivets and allow a small amount of material to be removed from the rudder horn assembly, which allows operators to obtain full rudder travel.

DATES: This AD is effective September 12, 2011

FMI: http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/583392BB4F328C77862578F8004E1580?OpenDocument
 

Advertisement

More News

Counting Down! ANN's Infamous April 1st Edition's Just Around The Corner!

Get Your Wacky Ideas In NOW! ANN E-I-C Note: Folks... we gotta warn you... our Annual April 1st Editions are LEGENDARY -- and this WILL be our best April 1st Edition yet. Based on >[...]

Airborne 02.24.17: RV-10 Suit Dismissed, 2016 GA Sales, Red Tail Legacy

Also: Falcon 9 Landing, TFR Busts, Denton Airshow, QF-16, Treasure Coast, 'Fly Safe' Campaign, Juno Mission When the news first came out, in 2015, that Van's Aircraft was sued for >[...]

Aero-News: Quote of the Day (02.26.17)

"This Symposium will provide stakeholders with the opportunity to talk face-to-face with a cross-section of government and industry representatives about regulations, research, and>[...]

TNA Selected As The Exclusive Electric Aircraft Tug Provider For Sun 'n Fun

More Than 5,000 Aircraft Are Expected To Attend Following an agreement with the Sun 'n Fun International Fly-In and Expo, TNA Aviation Technologies announced that the Company has b>[...]

Treasure Coast International Airport Gets $1.5 Million Federal Grant

Will Go Towards Construction Of A New Maintenance Hangar The U.S. Department of Commerce has awarded a $1.5 million AIP grant to Treasure Coast International Airport (KFPR) in Fort>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2017 Web Development & Design by Pauli Systems, LC