Vans RV-14 Surprised Crowds At Oshkosh | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Recent Daily Episodes

Episode Date

Monday

Tuesday

Wednesday

Thursday

Friday

Airborne On ANN

Airborne 01.16.17

Airborne 01.17.17

Airborne 01.18.17

Airborne 01.19.17

Airborne 01.20.17

Airborne Hi-Def On YouTube

Airborne 01.16.17

Airborne 01.17.17

Airborne 01.18.17

Airborne 01.19.17

Airborne 01.20.17

Fri, Aug 10, 2012

Vans RV-14 Surprised Crowds At Oshkosh

RV-FOURTEEN? Where did that come from? 

Something of a “stealth” project, the RV-14 made its inaugural public appearance at AirVenture a couple of weeks ago. but by the time the public got its first look at the new kit-built plane, it had already completed a comprehensive test program. The RV-14 is an aerobatic two-seat side-by-side airplane with a 46” wide cabin and a 27’ span. The wing uses the RV-10 airfoil and slotted flaps. A new cowling surrounds a Lycoming IO-390 producing 210 hp, but will accept the 200 hp IO-360. (There is NO option for a six cylinder engine.)  Fifty gallons of fuel is housed in two 25 gallon leading edge tanks. Tall seating and low canopy rails result in superb visibility – even better than previous RVs.  A tip-up canopy (the only canopy available) incorporates a slick hydraulic-strut assist and quick-release mechanism that makes it fit perfectly and open/close like a bank vault. A large baggage compartment behind seats can hold up to 100 lbs. The airplane rides on a new leaf spring main gear.

Vans said that the goal was to meet or exceed the performance of a 180 hp/constant-speed RV-7 in an airplane with better comfort, better visibility, longer range and more payload.

Like all other RVs, the RV-14 is built of riveted aluminum. However, the kit incorporates everything Van’s has learned in forty years, so building times should be substantially less than previous kits. All metal parts are completely formed and pre-punched -- even the main longerons. Rivet holes are punched full-size and main spars are assembled at the factory. The canopy bubble will come pre-trimmed. The plans/manual are combined in the style that works so well on RV-10 and RV-12. Complete wiring kits and avionics packages are designed and will be offered as options. A tailwheel RV-14 is in the works.

Wing kits should be available in September. After that, other airframe kits will be released at regular intervals until the complete airplane is available. After its Oshkosh debut, the RV-14 has joined the “demo fleet” at the Van’s Aircraft, Inc. factory in Aurora, Oregon.

FMI: www.vansaircraft.com

Advertisement

More News

Airborne 01.20.17: Astro-NIMBY!, Airbus Flying Car, JetSuiteX v KSMO

Also: Daher Delivers, Aviation Progress, Tecnam P2012, D.B. Cooper, MH370 Search, T-45C Accident, Piper We previously reported that studies indicate many complaints about airport n>[...]

Airborne 01.20.17: Astro-NIMBY!, Airbus Flying Car, JetSuiteX v KSMO

Also: Daher Delivers, Aviation Progress, Tecnam P2012, D.B. Cooper, MH370 Search, T-45C Accident, Piper We previously reported that studies indicate many complaints about airport n>[...]

Airborne 01.19.17: $200K Drone Fine, Sandia IVSI TSO, 'Can't Close' KSMO

Also: MH370 Search Suspended, Supporting AUVSI, Sikorsky S-92, Challenger Astronaut, Stressed Pilots, JBA Aviation, Embraer E2 A settlement agreement has been reached between the F>[...]

ANN's Daily Aero-Linx (01.21.17)

The Lindbergh Foundation The concept of balance is an integral part of what the Lindbergh Foundation Board looks for in a project requesting a grant. Charles and Anne Morrow Lindbe>[...]

ANN's Daily Aero-Term (01.21.17): Jump Zone

The airspace directly associated with a Drop Zone. Vertical and horizontal limits may be locally defined.>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2017 Web Development & Design by Pauli Systems, LC