Thu, Mar 20, 2003
The National Transportation Safety Board has
released the following update on its investigation of the November
12, 2001, crash of American Airlines flight 587, an Airbus
A300-600, in Belle Harbor, New York, which resulted in the deaths
of all 260 persons aboard and 5 persons on the ground:
Public Hearing:
The Safety Board held a public investigative hearing on this
accident during the week of October 29, 2002. Twenty-one witnesses
presented testimony during the 4-day hearing. Transcripts of the
testimony, as well as exhibits presented at the hearing, are
available on the Board's website.
Subsequent Investigative Work
All investigative groups are continuing their work in
preparation for the drafting of a final report. Highlights:
-
The
Systems Group is using data from a ground test to estimate pedal
forces that were used by the pilots in the accident aircraft. Also,
it has prepared the autopilot actuator and yaw damper actuator from
the accident aircraft for CAT scans and teardown, to be conducted
this spring.
- The Human Performance Group and the Operations Group visited
the American Airlines training facility in Dallas. Simulator
instructors who trained flight 587's first officer (presumed to be
the flying pilot) were interviewed to experience and evaluate the
simulator excessive bank training they provided, which was
discussed at length during the hearing. The groups also evaluated
an Upset Recovery Training Ground School and Flight Training
program using small, twin-engine aircraft to compare actual
airplane training with simulator training.
-
The
Structures Group is working with NASA and Airbus to arrange a
static lug test to be conducted in Hamburg, Germany this spring.
The left-side rear main attachment lug from an A310 tail fin box
panel will be tested to demonstrate the behavior of the lug under
tensile load conditions to which the fin of flight 587 had been
exposed during the accident sequence.
- The Aircraft Performance Group continues to evaluate simulator
data to validate the "Loads Module" used to compute
aerodynamic load calculations for the accident aircraft.
Final Report
Until the completion of the on-going work, a schedule for
release of a final report cannot be estimated.
More News
Aero Linx: International Business Aviation Council Ltd IBAC promotes the growth of business aviation, benefiting all sectors of the industry and all regions of the world. As a non->[...]
"During the annual inspection of the B-24 “Diamond Lil” this off-season, we made the determination that 'Lil' needs some new feathers. Due to weathering, the cloth-cove>[...]
Also: Bushcat Woes, Hummingbird 300 SL 4-Seat Heli Kit, Carbon Cub UL The newest Junkers is a faithful recreation that mates a 7-cylinder Verner radial engine to the airframe offer>[...]
Also: Seaplane Pilots Association, Rotax 916’s First Year, Gene Conrad After a decade and a half of struggling with the FAA and other aero-politics, G100UL is in production a>[...]
Also: Martha King Scholarship, Montaer Grows, Textron Updates Pistons, FlySto The FAA is hiring thousands of air traffic controllers, but the window to apply will only be open for >[...]