Thu, Feb 12, 2009
Says Proper Overhaul Procedures Were Not Followed
The Federal Aviation Administration (FAA) has issued an
Emergency Order of Suspension against AAR Landing Gear Services of
Miami, FL for violations of Federal Aviation Regulations.
AAR is an FAA-certificated repair station operating under Part
145 of the Federal Aviation Regulations, with ratings to repair
aircraft landing gear, airframe and aircraft accessories.
The Emergency Order was issued following inspections which
revealed that AAR did not follow aircraft manufacturer maintenance
manual procedures for conducting liquid penetrant exams, shot
peening and cadmium plating before returning to service a variety
of landing gear parts for air carrier aircraft. The FAA maintains
AAR employed defective processes and followed defective inspection
protocols.
Shot peening is a procedure to harden the surface of metal parts
and remove corrosion. Cadmium plating is a coating applied to metal
parts to prevent corrosion. Penetrant examination is a non-
destructive testing method usually performed to detect cracks and
corrosion.
The agency determined that AAR's actions returned aircraft parts
to service as being overhauled when they were not, and failed to
perform required maintenance procedures. All affected operators
were notified of the suspect parts in March 2008 and corrective
action was taken.
The Emergency Order of Suspension was effective Tuesday, and
remains in effect until AAR Landing Gear Services demonstrates that
it meets the requirements of the Federal Aviation Regulations.
AAR may appeal the Emergency Order to the National
Transportation Safety Board by February 20.
"We have worked diligently with the FAA over the past year to
respond to its concerns," said David P. Storch, Chairman and Chief
Executive Officer, AAR CORP. "We remain committed to resolving this
matter as expeditiously as possible. The company will also work
equally hard to minimize any inconvenience to its customers and
employees during this period."
More News
Chaff Thin, narrow metallic reflectors of various lengths and frequency responses, used to reflect radar energy. These reflectors, when dropped from aircraft and allowed to drift d>[...]
“Today, XB-1 took flight in the same hallowed airspace where the Bell X-1 first broke the sound barrier in 1947. I’ve been looking forward to this flight since founding>[...]
“Teaming up with the EAA and Berlin Express for this event in Cincinnati will give warbird fans a unique opportunity to see the aircraft that helped defend freedom and gave t>[...]
Hazardous Weather Information Summary of significant meteorological information (SIGMET/WS), convective significant meteorological information (convective SIGMET/WST), urgent pilot>[...]
Aero Linx: The Nebraska Aeronautics Commission The Nebraska Aeronautics Commission was created by the 1935 Legislature to oversee the development of aviation in the state. The Comm>[...]