Thu, May 05, 2005
Dassault's Falcon 7X
has flown for the first time, Thursday afternoon, at Dassault
Aviation's facility in Bordeaux Merignac, France. Falcon 7X s/n 1
took to the skies for the first time with Test pilots Yves "Bill"
Kerherve and Philippe Deleume at the controls. The airplane lifted
off at 8:45 am EST and flew for an hour and thirty six minutes.
"The first flight of the Falcon 7X was a success," said Kerherve
who is the Senior Test Pilot for Dassault Aviation. "The aircraft
performed beautifully and we're on track to start the rigorous 15
months of flight testing that lay ahead."
After departing Bordeaux's International Airport, the aircraft
climbed directly to 10,000 feet where various systems checks
including hydraulic, fuel, air data systems and landing gear
extraction/retraction tests were performed. The airplane then
climbed to 25,000 feet where acceleration/deceleration tests were
conducted as well as basic autopilot and auto-throttle
operations.
The Falcon 7X carried the registration numbers of F-WFBW to
remind those watching that this is the first business jet designed
with a Fly By Wire flight control system. The test aircraft was
fully equipped with instrumentation to allow the measurement of
more than 3000 digital and 1000 analog parameters. It touched down
at the Bordeaux airport at 10:21 a.m. EST.
"Today the pioneering spirit of Marcel Dassault lives on," said
Charles Edelstenne, Chairman and CEO of Dassault Aviation. "That
spirit is embodied in every one of our engineers, partners,
customers and flight test team who made this spectacular event
possible. This is surely a day we will all remember for years to
come."
During the next test flight, the airplane will be relocated to
the Dassault Test Center in Istres, France. The second test
aircraft will arrive in Istres in the 2rd Quarter and the third
test aircraft will arrive this summer. Falcon 7X s/n 3 will be
outfitted with a full interior and will be used for long range and
endurance tests as well as interior sound level validation.
Approximately 1,200 flight test hours have been allotted before
final certification by the FAA and EASA before the end of 2006.
Dassault says that it has 50 firm orders for the new biz-jet.
A static and fatigue test airframe has been undergoing tests at
CEAT in Toulouse since March 2005.
More News
Chaff Thin, narrow metallic reflectors of various lengths and frequency responses, used to reflect radar energy. These reflectors, when dropped from aircraft and allowed to drift d>[...]
“Today, XB-1 took flight in the same hallowed airspace where the Bell X-1 first broke the sound barrier in 1947. I’ve been looking forward to this flight since founding>[...]
“Teaming up with the EAA and Berlin Express for this event in Cincinnati will give warbird fans a unique opportunity to see the aircraft that helped defend freedom and gave t>[...]
Hazardous Weather Information Summary of significant meteorological information (SIGMET/WS), convective significant meteorological information (convective SIGMET/WST), urgent pilot>[...]
Aero Linx: The Nebraska Aeronautics Commission The Nebraska Aeronautics Commission was created by the 1935 Legislature to oversee the development of aviation in the state. The Comm>[...]