FAA Revises SAIB Regarding Synthetic Jet Fuels | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Recent Daily Episodes

Episode Date

Airborne Unlimited-
Monday

Airborne-Unmanned w/AUVSI-
Tuesday

Airborne Unlimited-
Wednesday

AMA Drone Report-
Thursday

Airborne Unlimited-
Friday

Airborne On ANN

Airborne Unlimited--03.30.20

Airborne UnManned--
03.31.20

ANN's Annual April 1st Edition!

Airborne Unlimited--04.02.20

Airborne Unlimited--04.03.20

Airborne-YouTube

Airborne Unlimited--03.30.20

Airborne UnManned--
03.31.20

ANN's Annual April 1st Edition!

Airborne Unlimited--04.02.20

Airborne Unlimited--04.03.20

Wed, Mar 25, 2020

FAA Revises SAIB Regarding Synthetic Jet Fuels

Wants To Assure Fuels Meet ASTM Standards

The FAA has revised its Special Airworthiness Information Bulletin (SAIB) advising aircraft operators, fixed base operators, certificated repair facilities, Flight Standard District Offices, Certificate Management Offices, and Foreign Civil Aviation Authorities that jet fuel made from the following synthetic blending components that meet the requirements of ASTM International Standard D7566 are acceptable for use on aircraft and engines certificated for operation with D1655 Jet A or Jet A-1 jet fuel if they are re-identified as D1655 fuel:

-Fischer Tropsch synthesized isoparaffinic kerosene (FT-SPK),
-hydroprocessed fatty acid esters and fatty acids (HEFA),
-synthesized isoparaffins (SIP),
-Fischer Tropsch synthesized kerosene with aromatics (FT-SPK/A), and
-alcohol to jet (ATJ), and
-catalytic hydrothermolysis jet (CHJ).

When D7566 jet fuels are re-identified as D1655 fuel, they meet all the specification requirements of D1655 fuel and, therefore, meet the approved operating limitations for aircraft and engines certificated to operate with D1655 fuel, unless otherwise prohibited by the engine or aircraft type certificate (TC) holder. We are revising this SAIB to add CHJ as a synthetic blending component that conforms to ASTM International Standard D7566.

The FAA relies on ASTM International to develop fuel specifications that applicants may designate as operating limitations for their approved products. These aviation fuel operating limitations may be listed in the product’s type certificate data sheet (TCDS), installation manual, service instructions, or as limitations associated with a supplemental type certificate. ASTM International issued ASTM Standard Specification D7566, “Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons,” for drop-in jet fuel from alternative feedstocks in September 2009. This specification defines properties for semi-synthetic jet fuel made from blending conventional jet fuel with synthetic blending components that are specified in individual annexes. These semi-synthetic jet fuels, specified in D7566, possess essentially identical composition, properties, and performance to conventional jet fuels.

Both D7566 and the existing specification for conventional jet fuel, ASTM International Standard D1655, “Standard Specification for Aviation Turbine Fuels,” are cross-referenced to allow D7566 fuels to be re-identified as D1655 fuels when they enter the distribution system. When re-identified, D7566 fuels made with FT-SPK, HEFA, SIP, FT-SPK/A, ATJ, or CHJ blending components meet existing FAA-approved operating limitations, unless otherwise prohibited by the engine or aircraft TC holder.

The following recommendations apply to FT-SPK, HEFA, SIP, FT-SPK/A, ATJ, or CHJ fuels that meet ASTM specification D7566 and are re-identified to ASTM D1655 Jet A or Jet A-1 fuels (unless otherwise prohibited by the engine or aircraft TC holder):

These fuels are acceptable for use on those aircraft and engines that are approved to operate with Jet A or Jet A-1 fuels that meet the D1655 standard. Aircraft Flight Manuals, Pilot Operating Instructions, or TCDSs that specify ASTM D1655 Jet A or Jet A-1 fuel as an operating limitation do not require revision to use these fuels. Current aircraft placards that specify Jet A or Jet A-1 fuels do not require revision and are acceptable for use with these fuels. Operating, maintenance, or other service documents for aircraft and engines that are approved to operate with ASTM D1655 Jet A or Jet A-1 fuel do not require revision and are acceptable for use when operating with these fuels. There are no additional or revised maintenance actions, inspections, or service requirements necessary when operating with these fuels.

(Source: FAA)

FMI: SAIB

Advertisement

More News

Barnstorming: Did Anybody Get The Number Off That Truck?

Yes, We Will Recover From This… But Have Little Doubt That Aviation Will Never Be Quite The Same Hi folks… I don't know about the rest of you but I have the unmistaka>[...]

Airborne 04.03.20: EAA-Sportys, AUS Suspends UAV Reg, A/C Registry Probs

Also: Raytheon-United Tech Merger, Aviation Database NPRM, Air Force Academy Tragedy, Crew Dragon Mockup Jettisoned Another milestone was reached by EAA this month, as a total of 7>[...]

Airborne 04.01.20: April 1st Episode, Bloomberg-NASA, Sanders-BizAv, Space Force

Also: 737 MAX and CDC, ‘Steam Gauge’ Rating, OneAviation Bids For Cirrus, EAA Water Park Billionaire Michael Bloomberg has announced that he will start his own commerci>[...]

Airborne-Unmanned 03.31.20: BVLOS in Canada, UPS Flight Forward, Continental

Also: ANN’s April 1st Episode, Parrot And DroneLogbook, ‘Pandemic Drone’, AVIUS Air Delivery MVT Geo-solutions and Iris Automation have been granted the first BVL>[...]

Aero-News: Quote of the Day (04.05.20)

“We’re able to build such a strong astronaut corps at NASA because we have such a strong pool of applicants to choose from. It’s always amazing to see the diversi>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2020 Web Development & Design by Pauli Systems, LC