CASA Urgent AD: Beechcraft | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Wed, Oct 05, 2005

CASA Urgent AD: Beechcraft

Subject: Beechcraft 1900 Series Aeroplanes
AD Number: AD/BEECH 1900/47 Elevators 12/2005 DM
Applicability:

  • Model 1900 aircraft, serial number UA-3.
  • Model 1900C aircraft, serial number UB-1 through UB-74, UC-1 through UC-174.
  • Model 1900C aircraft, serial numbers UD-1 through UD-6.
  • Model 1900D aircraft, serial numbers UE-1 through UE-439.

Requirement: 1. Inspect all elevator hinge support attachments on both left and right elevators for loose or missing rivets; as specified in Raytheon Aircraft Company Safety Communique No. 261 dated August 2005, following the applicable Raytheon Aircraft Company Maintenance Manual, Chapter 5-20-07 and Structural Repair Manual, Chapter 51-40-02. If loose or missing rivets are evident, replace affected rivets before further flight.
2. Inspect the elevator hinge joints for looseness and the clearance of each elevator to its stabiliser; as specified in Raytheon Aircraft Company Safety Communique No. 261, following the applicable Raytheon Aircraft Company Maintenance Manual, Chapter 5-20-07. If looseness of the elevator hinge joints or incorrect clearance between the elevators and their stabilisers is evident, correct the discrepancies before further flight.
Note: FAA AD 2005-18-21 Amdt 39-14262 refers.
Compliance: 1. Within 50 hours time in service after 4 October 2005.
2. Within 50 hours time in service after 4 October 2005.

This Airworthiness Directive becomes effective on 4 October 2005.

Background: The FAA received a report of an incident where the pilot of a Model 1900D aircraft experienced a binding elevator control column during takeoff. The pilot was able to free the control column. Inspection revealed a missing rivet and other loose rivets on
the outboard hinge attachment that attaches the elevator to the horizontal stabiliser.
The elevator counterweight horn showed evidence of rubbing against the horizontal
stabiliser, indicating possible incorrect clearance. Loose rivets were found on other
aircraft of the same type design.

FMI: www.casa.gov.au

Advertisement

More News

ANN's Daily Aero-Linx (04.17.24)

Aero Linx: Space Medicine Association (SMA) The Space Medicine Association of the Aerospace Medical Association is organized exclusively for charitable, educational, and scientific>[...]

ANN's Daily Aero-Term (04.17.24): Jamming

Jamming Denotes emissions that do not mimic Global Navigation Satellite System (GNSS) signals (e.g., GPS and WAAS), but rather interfere with the civil receiver's ability to acquir>[...]

ANN's Daily Aero-Linx (04.18.24)

Aero Linx: Warbirds of America The EAA Warbirds of America, a division of the Experimental Aircraft Association in Oshkosh, Wisconsin, is a family of owners, pilots and enthusiasts>[...]

Aero-News: Quote of the Day (04.18.24)

"From New York to Paris, this life-size replica of the Webb Telescope inspired communities around the world and, in doing so, invited friends and families to explore the cosmos tog>[...]

ANN's Daily Aero-Term (04.18.24): Hold-In-Lieu Of Procedure Turn

Hold-In-Lieu Of Procedure Turn A hold-in-lieu of procedure turn shall be established over a final or intermediate fix when an approach can be made from a properly aligned holding p>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC