Wed, Oct 05, 2005
Subject: Beechcraft 1900 Series
Aeroplanes
AD Number: AD/BEECH 1900/47 Elevators 12/2005 DM
Applicability:
- Model 1900 aircraft, serial number UA-3.
- Model 1900C aircraft, serial number UB-1 through UB-74, UC-1
through UC-174.
- Model 1900C aircraft, serial numbers UD-1 through UD-6.
- Model 1900D aircraft, serial numbers UE-1 through UE-439.
Requirement: 1. Inspect all elevator hinge
support attachments on both left and right elevators for loose or
missing rivets; as specified in Raytheon Aircraft Company Safety
Communique No. 261 dated August 2005, following the applicable
Raytheon Aircraft Company Maintenance Manual, Chapter 5-20-07 and
Structural Repair Manual, Chapter 51-40-02. If loose or missing
rivets are evident, replace affected rivets before further
flight.
2. Inspect the elevator hinge joints for looseness and the
clearance of each elevator to its stabiliser; as specified in
Raytheon Aircraft Company Safety Communique No. 261, following the
applicable Raytheon Aircraft Company Maintenance Manual, Chapter
5-20-07. If looseness of the elevator hinge joints or incorrect
clearance between the elevators and their stabilisers is evident,
correct the discrepancies before further flight.
Note: FAA AD 2005-18-21 Amdt 39-14262
refers.
Compliance: 1. Within 50 hours time in service after 4 October
2005.
2. Within 50 hours time in service after 4 October 2005.
This Airworthiness Directive becomes effective on 4 October
2005.
Background: The FAA received a report of an
incident where the pilot of a Model 1900D aircraft experienced a
binding elevator control column during takeoff. The pilot was able
to free the control column. Inspection revealed a missing rivet and
other loose rivets on
the outboard hinge attachment that attaches the elevator to the
horizontal stabiliser.
The elevator counterweight horn showed evidence of rubbing against
the horizontal
stabiliser, indicating possible incorrect clearance. Loose rivets
were found on other
aircraft of the same type design.
More News
Chaff Thin, narrow metallic reflectors of various lengths and frequency responses, used to reflect radar energy. These reflectors, when dropped from aircraft and allowed to drift d>[...]
“Today, XB-1 took flight in the same hallowed airspace where the Bell X-1 first broke the sound barrier in 1947. I’ve been looking forward to this flight since founding>[...]
“Teaming up with the EAA and Berlin Express for this event in Cincinnati will give warbird fans a unique opportunity to see the aircraft that helped defend freedom and gave t>[...]
Hazardous Weather Information Summary of significant meteorological information (SIGMET/WS), convective significant meteorological information (convective SIGMET/WST), urgent pilot>[...]
Aero Linx: The Nebraska Aeronautics Commission The Nebraska Aeronautics Commission was created by the 1935 Legislature to oversee the development of aviation in the state. The Comm>[...]