Sun, Sep 19, 2010
Board Cites Rudder Problems Encountered Before AA Airbus Went
Down
The NTSB recently issued a safety
recommendation to the European Aviation Safety Agency (EASA)
regarding the November 2001 accident involving an American Airlines
Airbus near JFK. Flight 587, which was flying to the Dominican
Republic, went down in the Belle Harbor neighborhood of Queens.
There were no survivors among the 260 passengers and crew, and five
people on the ground were also killed.
The NTSB determined that the probable cause of the accident was
"the in-flight separation of the vertical stabilizer as a result of
the loads beyond ultimate design that were created by the first
officer's unnecessary and excessive rudder pedal inputs.
Contributing to these rudder pedal inputs were characteristics of
the Airbus A300-600 rudder system design and elements of the
American Airlines Advanced Aircraft Maneuvering Program." Flight
587 encountered wake turbulence from a Boeing 747 shortly after
takeoff, and the pilot's steering response created severe strain on
the rudder mechanism. Sounds of likely mechanical failures could be
heard in the recorded data recovered from the plane's wreckage, as
well as the pilots' attempts to right the aircraft.
Soon after its investigation commenced, the NTSB issued a safety
recommendation for updates in training of all pilots of
transport-category airplanes.
The "loads" referenced by the NTSB
are aerodynamic stresses caused by rapid movement of the rudder in
an attempt to combat the aircraft movement caused by the wake of
the nearby Boeing 747. The report, however, also pointed to
"characteristics of the Airbus A300-600 rudder system design and
elements of the American Airlines Advanced Aircraft Maneuvering
Program," as a contributing factor in the crash.
The Accident airplane was built in France, subject to European
regulatory oversight. In its new recommendation, issued on August
4, 2010, the NTSB encourages modification of European certification
standards to ensure safe handling qualities "in the yaw axis
throughout the flight envelope," as well as instituting limits for
the sensitivity of rudder pedals. The yaw axis refers to the axis
about which the aircraft nose and tail moves side-to-side. The
flight envelope refers to the outer boundaries of flight for which
the aircraft is designed.
The NTSB recommendation involves limiting rudder movement so
that the aerodynamic stresses or "loads" do not exceed the design
maximums. The NTSB also suggests review and modification, if
necessary, of all existing models of the Airbus A300-600 and A310
aircraft.
More News
Light Gun A handheld directional light signaling device which emits a brilliant narrow beam of white, green, or red light as selected by the tower controller. The color and type of>[...]
"The journey to this achievement started nearly a decade ago when a freshly commissioned Gentry, driven by a fascination with new technologies and a desire to contribute significan>[...]
Aero Linx: JAARS, Inc. For decades now, we’ve landed planes on narrow rivers and towering mountains. We’ve outfitted boats and vehicles to reach villages that rarely se>[...]
"Our driven and innovative team of military and civilian Airmen delivers combat power daily, ensuring our nation is ready today and tomorrow." Source: General Duke Richardson, AFMC>[...]
Aircraft Conflict Predicted conflict, within EDST of two aircraft, or between aircraft and airspace. A Red alert is used for conflicts when the predicted minimum separation is 5 na>[...]